1992 Johnson/Evinrude EN 2.3 thru 8 outboards Service Manual, Page 231Get this manual
Assembly Before beginning assembly procedures, refer to Cleaning and Inspection, Page 6-4 1221 1Using socket, install new gearcase head sealApply OMC
Gasket Sealing Compound to the metal case of the sealThe seal should be installed with the letters facing outward Tap seal in until seatedApply OMC Triple-Guard grease to the seal lips
r:;:;] 2Apply OMC Gasket Sealing Compound to the outside diameter of two new gearcase cover sealsInstall the seals back-to-back on OMC Seal Installer, PIN 326547Then press them into the gearcase cover until they are flushApply OMC Triple-Guard grease to the seal lips