1992 Johnson/Evinrude EN 2.3 thru 8 outboards Service Manual, Page 223Get this manual
30 22293
128 17Place the pinion thrust washer in the gearcase with chamfered side facing top of the gearcasePosition the thrust bearing then the pinion1291 SLubricate, install the driveshaftRotate the shaft to engage the pInion1301 9the water intake screen in the gearcase with tabs faCing upf3'1l 10Apply OMC Gasket Sealing Compound to both sides of new impeller place gasketPosition the gasket and impeller plate on the gearcase1321 11 Apply OMC Needle Bearing Assembly Grease to the impeller drive pin CDPlace the pin on flat of the driveshaft33 1
12Oil and install new water pump grommet