1992 Johnson/Evinrude EN 2.3 thru 8 outboards Service Manual, Page 221Get this manual
17 22436
r:J5l 12Remove and discard both gearcase head sealsUse OMC Puller Bridge, PIN 432127, and OMC Small Puller, PIN 432131f'16l 13Remove and discard the gearcase head bearingUse OMC Bearing Removerllnstaller, PIN 392091 r:r7l 14Remove and discard both driveshaft sealsUse OMC Puller Bridge, PIN 432127, and OMC Small Puller, PIN 432131r:J8l 15To remove the upper and lower driveshaft bearings, assemble the components of the OMC Driveshaft Bearing Remover and Installer, PIN 392092 (Guide PlateSmall Disc with flat side toward bearing, and Rod ), within the gearcaseAttach OMC Slide Hammer, PIN 391008, to the rod and remove both bearings 'at the same timer:J9l 16To remove the forward gearcase bearing, assemble OMC Puller Bridge, PIN 432127, and OMC Bearing Puller, PIN 432130Make sure that the jaws of the puller are oriented vertically and then extract the forward bearing1201 17To remove the shift rod bushinguse components of