1992 Johnson/Evinrude EN 2.3 thru 8 outboards Service Manual, Page 201Get this manual
Assembly
1Install the lower engine cover to the exhaust housing
f61 f51 2Place new O-ring on the shift leverInstall the shift rod
pinion with dot toward the port sideInstall the shift shaft gear with flat directly on topInsert the shift lever and engage shift shaft gearInstall and tighten the setscrew securely
f4'l 3Pack the gear cavity with OMC Tripe-Guard greasePlace new O-ring on the exhaust housing coverInstall the cover and tighten the two screws securelyInstallation
f3l 1Lubricate the upper mount blocks with liquid soap and place in position in the exhaust housing 2Slide the exhaust housing into the swivel bracket3Place the two lower side mounts into the two lower t=J mount housingsPut the port housing in place, insert the thrust mount and position the starboard housing Secure the lower mounts with screws