1992 Johnson/Evinrude EN 2.3 thru 8 outboards Service Manual, Page 166Get this manual
r:J3l22Inspect wrist pin, needle bearings, and washersIf worn, replace all these components23Refer to Cleaning and Inspection at beginning of this sectionAssemblythru Deluxe Proceed slowlyMake no forced assemblies unless pressing operation is called forAll internal components must be perfectly clean and lightly coated with Johnson or Evinrude Outboard Lubricant1111II
INotel Use new gaskets, seals, and O-rings during assembly14INote Make sure water deflector is in place1Apply coat of oil to wrist pin and wrist pin hole in piston