1992 Johnson/Evinrude EN 2.3 thru 8 outboards Service Manual, Page 112Get this manual
STOP CIRCUIT TEST Elimination Test f31 1Remove the wire retainer and disconnect stop circuit 1-pin Amphenol connector
i or spark tester during cranking tests
To avoid possible shock hazard, do not handle ignition coils
2Crank engine and observe results at spark tester If spark now jumps alternately at each gap, the problem is in the stop circuitGo to Ohmmeter Test If there is no spark at one or both gaps, go to STEP IGNITION PLATE OUTPUT TEST