1992 Johnson/Evinrude EN 2.3 thru 8 outboards Service Manual, Page 99Get this manual
71 8From OMC Universal Puller Set, PIN 378103, assemble the following components:
Body, PIN 307636
Pressing Screw, PIN 307637 Handle, PIN 307638 Screws (3), PIN 307641 Screws (3)2.3, 3.3 Only, PIN 115308 Washers (3), PIN 307639 Washers (3)2.3, 3.3 Only, PIN 307646
71 9Install the puller on flywheel with body flat side upSeat the shoulder screws completelyHold puller with its nandle and tighten pressing screw until flywheel releases10Remove the flywheelInstallation 1Install the flywheel key as follows:
f81 2.3, 3.3Install the flywheel key with its outer edge parallel
to centerline of crankshaft19l3 thru -Install the flywheel key with its outer edge parallel to centerline of crankshaft and single upset mark facing down- -'-"-"'-=''-==:::-:::-1