1992 Johnson/Evinrude EN 2.3 thru 8 outboards Service Manual, Page 75Get this manual
6Remove float pin and float hingeRemove float valve 0 7Remove valve seat 8Remove throttle lever
[!] 9Remove carburetor body cap19l 10Compress spring and unhook throttle cable from
throttle valve
11Remove jet needle and retainer
from throttle valve
12Refer to Carburetor Cleaning and Inspection, Page 2-16Assembly Before proceeding, be sure that all parts are perfectly cleanBe sure that all replacement parts match original ones in size and shapeReplace all gaskets, O-rings, and sealing washers each time you assemble carburetorr,Ql 1If clip is removed from jet needlerefer to Carburetor Adjustment to determine correct slot2Assemble the jet needle in throttle valve r,Ql 3Place retainer in throttle valve, over the clipAlign retainer slot with the slot in the throttle valve