1992 Johnson/Evinrude EN 2.3 thru 8 outboards Service Manual, Page 65Get this manual
Installation 1Assemble the shut-off valve to the fuel tank2Install fuel tank on powerheadTighten screws to torque of 60-84 inIbs(7-9 Nm)
3Connect the fuel hose to the carburetor with tie strap using OMC Tie Strap Installation Tool, PIN 323716
[iJ 4Make certain water indicator hose is in positionin positionTighten two screws to hold cover
rv 5Make certain shut-off valve is at OFF positionPlacevalve starboard engine cover on powerhead and align the shut-off
6Install the port engine cover and all attaching screws
Integral Fuel Tank Servicing3
Removal
1Remove the lower engine covers"" 2Avoid accidental starting of engine while servicing; twist and remove spark plug leads
"" 3Disconnect fuel hose at the carburetorFuel will flow from the hose when disconnectedPlug the hose with smooth object