1991 Johnson/Evinrude Models "EI" 40 thru 55 Service Manual, Page 296Get this manual
231 Place throttle lever spacer over throttle lever bushing in the throttle lever assembly 7Place throttle lever assembly onto shift lockout cam bossPlace countersunk washer on throttle lever assembly with countersink facing outwardSecure throttle lever assembly using new patch screwTighten screw to torque of 25-35 inIbs(2,8-3,9 Nm) 1241 '"
8If removed, install lever separator plate into housingApply OMC Screw Lock to threads of the two screws and tighten screws to torque of 10-15 inIbs(1,1-1,7 Nm)Do not operate the remote control without the separator plate installed and the two retaining screws properly torqued