1991 Johnson/Evinrude Models "EI" 40 thru 55 Service Manual, Page 293Get this manual
Prewired Surface Mount Remote Control Servicing Disassembly
i systemsFailure to do so could result in injury from ignition
sources (sparks) or from contact with moving parts if accidental cranking or starting occurs
'" 1Disconnect battery cables before servicing electrical
Remove control handleloosen hex head screw three complete turns
19l 3Support control on blocks to allow the control handle to be
driven off the controlPlace center punch in head of hex head screw, and tap with plastic hammer to disengage the control handle splines from the hub splinesRemove the hex head screw and the control handleRemove three screws halves apart