1991 Johnson/Evinrude Models "EI" 40 thru 55 Service Manual, Page 254Get this manual
COA1362
COA1361
""1-7l 8Bend the inside loop of the rewind spring in toward LIJ the center of the starter housing Engage the slot of the pulley with the inner loop of the rewind spring and install the pulley in the starter housing r:tOlr-:il 9Place the friction plate spring washer and the L!JL1!J friction plate on the pulley hubSecure the friction plate and friction plate spring washer with the pulley lockring
10Be sure the starter pawl bushing is installed in the pulleyApply OMC Triple -Guard grease or Lubriplate 777 to boss of the starter pawlPlace spring washer on the boss of the starter pawlPlace the starter pawl in the pulley11 Position the starter housing spring in the starter housing