1991 Johnson/Evinrude Models "EI" 40 thru 55 Service Manual, Page 244Get this manual
ftIbs(22-24 Nm)Use new tab-lock washer each time, and bend tabs around driveshaft nut to secure t!J L!J impeller nut onto driveshaftTorque impeller nut to 16-18
'3l 10Assemble intake housing to main housingApply OMC
Gasket Sealing Compound to threads of six retaining screws and install them finger tight only
r;t r" 9Assemble remaining shims, new tab-lock washer, and
Check for any rubbing or binding between the casing liner and impellerIf clearance is greater on one side, verify that the intake housing is centered Torque screws in crisscross pattern to 10-12 ftIbs(14-16 Nm)
11Repeat Step to verify adjustmentGate and Shift Cable AdjustmentCam Models Gate Adjustment
1Move remote control handle to NEUTRAL detent