1991 Johnson/Evinrude Models "EI" 40 thru 55 Service Manual, Page 226Get this manual
Assembly INotel Before beginning assembly procedures, all gearcase components must be thoroughly cleaned and in serviceable condition Refer to Cleaning and Inspection, Page 6-5 42 1Assemble the following components of OMC Pinion Bearing Remover and Installer, PIN 391257as shown:
PIN 326584 Spacer in0 .0Flat Washer
-20 in Hex Head Screw
PIN 326582 Rod PIN 326575 Installer -20 inHex Head Screw PIN 391260 Plate
2Place the bearing on the installer tool with the lettered side of the bearing facing the toolUse OMC Needle Bearing Assembly Grease to hold the bearing onto the tool3Insert the tool with the bearing into the gearcaseDrive the bearing into the gearcase until the washer on the tool contacts the spacer
C OA3083
CD on the pinion bearing screwApply OMC Nut Lock to threads of the screwInstall the screw into the gearcaseTighten the screw to torque of 48-80 inIbs(5,5 -9,0 Nm)43 4Remove the toolPosition new O-ring
5To install the water intake screen, drop it into the water intake cavity, and push it down as far as it will go with screwdriver or other suitable tool