1991 Johnson/Evinrude Models "EI" 40 thru 55 Service Manual, Page 207Get this manual
Assembly
Before beginning assembly procedures, all gearcase components must be thoroughly cleaned and in serviceable conditionRefer to Cleaning and Inspection, Page 6-5r:Jl1Assemble the following components of OMC Special Tool PIN 391257 and OMC Pinion Service Kit PIN 433033 -20
PIN 334986 Spacer (from PIN 433033) in0.0Flat Washer PIN 326575 Installer (from PIN 391257) -20 inHex Head Screw
inHex Head Screw
PIN 326582 Rod (from PIN 391257)
PIN 334987 Guide Plate (from PIN 433033)
2Place the bearing on the installer tool with the lettered side of the bearing facing the toolUse OMC Needle Bearing Assembly Grease to hold the bearing onto the tool
3Insert the tool with the bearing into the gearcaseDrive the bearing in the gearcase until the washer on the tool contacts the spacer