1991 Johnson/Evinrude Models "EI" 40 thru 55 Service Manual, Page 171Get this manual

1991 Johnson/Evinrude Models "EI" 40 thru 55 Service Manual, Page 171

[!] 10Remove screw securing steering handleRemove handleDisassembly
r;;l 1Using OMC Twist Grip Remover PIN 390767, depress the grip detentsTighten screwand remove the grip by pulling it while turning the idle adjusting knob clockwise

2Remove the helix halvesrollerand guides
[!!] 3Pull the throttle pin out of the cable1121 4Remove throttle end cap from inner handle

Back to 1991 Johnson/Evinrude Models "EI" 40 thru 55 Service Manual