1991 Johnson/Evinrude Models "EI" 40 thru 55 Service Manual, Page 157Get this manual
142145Install starboard lower engine cover mount bracket and torque screws to 60-84 inIbs(7-9 Nm)46Install the complete ignition, electrical and fuel system i and ignition wiring is routed and clamped in its original
positionInstallation 1Position new powerhead gasketDo not use sealer on the gasket
'" To prevent possible fire or explosion, make sure all electrical
rl2Coat driveshaft splines with OMC Moly LubeDo not coat L.J top surface of driveshaft as lubricant here may prevent seating of driveshaft in crankshaft3Lower the powerhead assembly into place
l!J eight
r:;] 4Apply OMC Gasket Sealing Compound to threads of the powerhead retaining screwsInstall and torque the screws to 18-20 ftIbs(25-27 Nm)