1991 Johnson/Evinrude EI Outboards 2.3 thru 8 Service Manual, Page 231Get this manual
Cleaning and Inspection
1Wash metal components in solvent and dry with compressed air2Inspect spring for worn or broken end loops3Inspect all components for wear4Inspect rope and discard if frayedReplace with rope cut to length of 53 in(135 cm)5Examine pulley and housing for sharp edges and rough surfaces that could fray ropeFile and polish to removeAssembly
1Lubricate spring, spring cavity and spindle with OMC TripleGuard grease or Lubriplate 7771sl 2Hook end of spring over catch and coil spring counterclockwise inside starter housing