1991 Johnson/Evinrude EI Outboards 2.3 thru 8 Service Manual, Page 191Get this manual
Assembly
1Install the lower engine cover to the exhaust housing
'sl 'sl 2Place new a-ring on the shift leverInstall the shift rod
pinion with dot toward the port sideInstall the shift shaft gear with flat directly on topInsert the shift lever and engage shift shaft gearInstall the shift lever and engage shift shaft gearInstall and tighten the setscrew securely
f41 3Pack the gear cavity with OMC Triple-Guard greasePlace new a-ring on the exhaust housing coverInstall the cover and tighten the two screws securelyInstallation
rJl 1Lubricate the upper mount block with liquid soap and place them in position in the exhaust housing
[!] 2Slide the exhaust housing into the swivel bracketr:;] 3Place the two lower side mounts into the two lower mount housingsPut the port housing in place, insert the thrust mount and position the starboard housing Secure the lower mounts with screws