1991 Johnson/Evinrude EI Outboards 2.3 thru 8 Service Manual, Page 189Get this manual
6Place the steering friction plate in the bracket7Install the exhaust housing on the swivel bracket with the upper and lower swivel bracket retainers8Apply OMC Gasket Sealing Compound to threads of the retaining screwsInstall the screws and tighten to torque of 60-84 inIbs(7-9 Nm) Midsection Adjustments3, 4
Throttle Friction Adjustments3, 4
Isl The throttle friction adjustment knob is located on the steering
Tilt Friction Adjustment3, 4
handleTurning the knob clockwise increases friction on the throttle rod assembly
L!.J the gearcase from TILT to RUN position
rJl Tighten the tilt shaft nut only enough to control the return of