1991 Johnson/Evinrude EI Outboards 2.3 thru 8 Service Manual, Page 110Get this manual
Ignition Coil Replacement Removal 1Twist and remove cover to remove the spark plug lead and primary leads from the ignition coil
2Notice the fastener and washer orientation before removing any screws
3Remove the coil mounting screws and remove the coil and
washersInstallation
f1l f21 1Assemble the correct sequence of washers and locate
the ignition coil on the powerheadInstall and tighten the retaining screws to torque of 48-96 inIbs(5,4-10,8 Nm)
2Apply light coating of OMC Triple-Guard grease to the ribbed portion of the spark plug ceramics and to the openings of each of the spark plug lead coversInstall the spark plug leads