1991 Johnson/Evinrude EI Outboards 2.3 thru 8 Service Manual, Page 81Get this manual
RemovalDeluxe '" To avoid accidental starting of engine while servicing, twist and remove spark plug leads1Remove low speed adjustment knob by pulling straight out r:jl
2Remove retaining ring on choke knobPull knob out through hole in lower engine cover3 Remove screwcam followerand link
4Disconnect the fuel hose at the carburetor]
5Remove two nuts, carburetor and gasket6If necessary, remove intake manifold screws, and remove leaf assembly and gaskets from the powerhead
7Refer to Disassembly, Page 2-26InstallationDeluxe
INote Do not use sealer on intake manifold or carburetor gaskets'" Replace any fuel hoses or fuel hose clamps if deteriorated or damaged1Attach the leaf plate and intake manifold using new gaskets Tighten screws to torque of 60-84 in Ibs(79 Nm)