1991 Johnson/Evinrude EI Outboards 2.3 thru 8 Service Manual, Page 75Get this manual
6Remove float pin and float hingeRemove float valve7Remove valve seat 8Remove throttle lever9Remove carburetor body cap CD
19l 10Compress spring
throttle valve
and unhook throttle cable from
11Remove jet needle and retainer from throttle valve12Refer to Carburetor Cleaning and Inspection, Page 2-16Assembly Before proceeding, be sure that all parts are perfectly cleanBe sure that all replacement parts match original ones in size and shapeReplace all gaskets, O-rings and sealing washers each time you assemble carburetor'1Ql 1If clip is removed from jet needlerefer to Carburetor Adjustment to determine correct slot2Assemble the jet needle in throttle valve'1Ql 3Place retainer in throttle valve over clipAlign retainer slot with the slot in throttle valve