1991 Johnson/Evinrude EI 60 thru 70 outboards Service Manual, Page 335Get this manual
1341 1351
16With the tilt cylinder secured in soft-jaw vise, slide the band over the cylinderOil and install the O-ring on the band nutInstall the band nut into the cylinderInstall the band nut loosely
17Slide the piston and rod assembly into the cylinder but do not engage the threads of the capSet the assembly aside at this time
36 18Remove the three oil reservoir retaining screws with washers Remove the oil reservoir from the manifold
19Clean and inspect the oil reservoir, retaining screws, washers and O-ringReplace any components, if necessary20Remove the three screws reservoir filter Q)