1991 Johnson/Evinrude EI 60 thru 70 outboards Service Manual, Page 270Get this manual
43 C02S17
43 7Push core wire CD (from engine end) through wire clamp Q) until wire is flush, in(0,8 mm), with end of casing
1441 8Turn in set screw on large end of wire clamp until ittouches
core wire, then tighten one more full turn to kink and position core wire
145 9Grease trunnion pocket in housing halfLift throttle cable
and rotate cable forward until trunnion cap can be inserted into trunnion pocketCOB5635
1461 '0Position throttle lever by hand to