1991 Johnson/Evinrude EI 60 thru 70 outboards Service Manual, Page 264Get this manual
f131 10Lift shift and throttle plate from housingUse ill caution when removing shift and throttle plate as detent spring is highly compressedIt might fly out, causing personal injuryWear safety glassesf131 11 Remove detent roller CD,
detent shoe
and detent
[!!] 12Lift shift lever assembly from control1141 13To remove throttle lever assemblyremove flat-head
screw and countersunk washer from controlDiscard the patch screwLift throttle lever assembly and throttle lever spacer from control
r:t5l1,61 14
Remove screw and locknut retaining the shift lockout cam to the fast idle leverDiscard the locknutRemove keeper plate screw Lift shift lockout cam and shift lockout lever CD from housingRemove spring washer and fast idle lever from housing15The key switch, warning horn, neutral start switch, and emergency stop switch are serviceable, if necessaryReplace defective components
To disassemble control handle, remove two screws securing the plate to the control handle Lift neutral lock slide and slide return spring from control handleRemove screw retaining control handle knob and four screws retaining control handle cover Remove control handle knob and control handle cover from control handleTo remove trimtilt switch assembly, remove screw retaining switch to cover