1991 Johnson/Evinrude EI 60 thru 70 outboards Service Manual, Page 243Get this manual
Electric Starter Servicing, All Models Removal
I Disconnect the battery cables at the battery
1Disconnect the starter motor lead at the motor2Remove the carburetor air silencer assembly for improved access
3 Remove the three screws and lockwashers retaining thestarter to the powerhead
Disassembly 1Observe alignment marks on commutator end cap and drive end cap for correct reassemblyRemove two thru-bolts from starter motor[2Tap the commutator end cap and carefully remove it to prevent the loss of four springs under the two ground brushes and insulated brushes[3Tap the drive end cap to loosen it and pull armature from the frame You will find that the permanent magnets in the frame will resist removal of the armature