1991 Johnson/Evinrude EI 60 thru 70 outboards Service Manual, Page 191Get this manual
10 26645
[!] 4Remove the helix halves Q), roller Q) and guides 5Pull the throttle pin out of the cable6Remove the stop switch cover7Remove the tie straps from large braided tube and pull stop switch wires in small braided tube throughf111 8Remove the throttle cable retainer clip (0 Pry the throttle cable trunnion out of the steering handle and remove the cable9Remove the throttle friction control
[!3J 10Remove the warning horn assembly from the handlef131 11 Using punch and mallet, drive the steel pin that retains the inner handle from the steering handleNote Do not remove inner handle except to replace it