1991 Johnson/Evinrude EI 60 thru 70 outboards Service Manual, Page 186Get this manual
20 1201 6Install the trail lock lever, detent, handle, and bushing in
the starboard stern bracket7Route the trim sender wires through the braided tube and install the sender unit in the port stern bracket
12211231 8Install the upper and lower steering shaft bushings
and new seals in the swivel bracketBoth seal lips face out Coat the seals' outside surface with OMC Gasket Sealing Compound Coat the bushings and seal lips with OMC Triple-Guard grease
1241 9Coat tilt tube bushings with OMC Triple-Guard grease and