1991 Johnson/Evinrude EI 60 thru 70 outboards Service Manual, Page 184Get this manual
[!I 5Loosen both tilt limit cam retaining screwsI2J 6Remove the starboard tilt tube nutf81 7Thread the adapter from OMC Steering Tube Service Kit PIN 434523 onto the port end of the tilt tube Thread OMC Slide Hammer PIN 432128 into the adapter until at least in(51 mm) of thread are engagedPull the tilt tube from the stern bracketsIgl SRemove the wiper from inside the steering tubeInspect the wiper and replace if necessary9Remove the swivel bracket and tilt tube bush ingsr:j1l 10Remove the trim sender unit from the port stern bracket and pull its wires through the braided tube f121 r:Jil 11