1991 Johnson/Evinrude EI 60 thru 70 outboards Service Manual, Page 180Get this manual
9Remove the thrust rod starboard from
the stern brackets
f181 10Remove the stern bracket to spacer screwsport and r;7l 11Remove the shock absorber pin set screw Remove the
shock absorber pinRemove the shock absorber from the spacerTTL Models
1Remove one of the tilt tube nutsPull the tilt tube out of the swivel bracket assemblyIf necessary, use OMC Steering Tube Service Kit PIN 434523Lift the swivel bracket from the stern brackets2Remove the thrust rod from the stern brackets
f181 3Remove the stern bracket to spacer screwsport and
starboardAssembly
r;:;] 1Manual Tilt ModelsPlace the bushings in the shock L.ZJ absorber basePosition the shock absorber in the spacerInstall the pin through the spacer and shock absorberInstall the pin set screw in the spacer and tighten to torque of 24-26 inIbs(3-4 Nm)