1991 Johnson/Evinrude EI 60 thru 70 outboards Service Manual, Page 162Get this manual
11Install the lower pan support screws and washers on the port and starboard bracketsTorque the screws to 60-84 inIbs(7-9 Nm)
Install the forward lower coverTighten the screws
securely
1,2l 13Install the rear lower coverLoosely install the four front '13l 14Install the two rear screws securely
Tighten all six screws
] 15Secure the powerhead ground lead to the powerheadJ,41 16Align the shift rod and shift leverInstall the shoulder screw and torque to 60-84 inIbs(7-9 Nm) r:;;-] 17modelsAlign the shift lever and shift rodPull the shift lever away from the powerhead and install retainer clipThe clip must compress the flat washer and wave washer
i aligned properly and securely installed