1991 Johnson/Evinrude EI 60 thru 70 outboards Service Manual, Page 108Get this manual
Flywheel Servicing In order to produce the voltage necessary to run an ignition system, the flywheel magnets must be of particular strengthWeak flywheel magnets can cause low ignition voltage which could affect motor performanceWeak flywheel magnets can also cause low readings on ignition test equipment such as the peak-reading voltmeter which may cause unnecessary replacement of ignition componentsFlywheels rarely go bad and would only be replaced as last resort in solving an ignition problem Removal
1To avoid accidental starting of engine while servicing, twist and remove all spark plug leadsRemove flywheel nut using strap wrench or other suitable tool to hold the flywheel