1991 Johnson/Evinrude EI 60 thru 70 outboards Service Manual, Page 25Get this manual
New Engine Preparation Rtr.tion
The careful preparation of new engine will ensure owner satisfaction 1Inspect cartonIf damaged, contact carrier2Inspect engine: If shipping damage is found, contact carrier Check for loose parts or connections3Check gearcase lubricant levelFill to oil level hole4Install test wheel and put engine into test tank
Own Phone
SOW To N_
-,PurchOe
uDp,- Dc-, DGSold By
PI TyPI' or P, int now rea;"i tM
00'0(manual few this pnMIuct
ill fuel primer system
p5Pressure test fuel system by momentarily activating the
Check for leaks!
Cultome,',Sig,tur
6Start engine and check cooling system operation
& Check shift operationill
8Check electrical and ignition systems for stray spark sources9Check all adjustmentsSee Synchronization and Linkage Adjustments, this section10Check idle RPM while engine is running in FORWARD gearThe boat must be in the water, under normal operating conditions, with the correct propeller installedThe boat's movement must be unrestrainedThe boat must not be tied to dock or trailer11Check full -throttle test wheel RPM See Engine Specifications, this section12Correct any problems found