1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual, Page 265Get this manual

1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual, Page 265

Tilt Limit Switch If the motor makes contact with the boat's motor-well, the maximum tilt limit must be adjustedTo adjust: Place motor in normal RUN position Loosen cam screw Rotate cam tilt height
up to reduce maximum tilt heightOr, rotate cam down to increase maximum

Tighten cam screw Repeat the procedure until maximum tilt up is achieved without any interference

Back to 1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual