1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual, Page 253Get this manual
23 6Place throttle lever spacer over throttle lever bushing in the throttle lever assembly 241 '"
i cam bossPlace countersunk washer on throttle lever
7Place throttle lever assembly onto shift lockout
assembly with countersink facing outwardSecure throttle lever assembly using new patch screwTighten screw to torque of 25-35 inIbs(2,8-3,9 Nm)24 '" 8If removed, install lever separator plate into housingApply OMC Screw Lock to threads of the two screws and tighten screws to torque of 10-15 inIbs(1,1-1 ,7 Nm)Do not operate the remote control without the separator plate installed and the two retaining screws properly torqued