1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual, Page 250Get this manual

1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual, Page 250

Prewired Surface Mount Remote Control Servicing
Disassembly

ill systemsFailure to do so could result in injury from ignition
sources (sparks) or from contact with moving parts if accidental cranking or starting occursf81 2Remove control handleloosen hex head screw three complete turns
1Disconnect battery cables before servicing electrical

19l 3Support control on blocks to allow the control handle to be
EI driven off the controlPlace center punch in head of hex head
screw, and tap with plastic hammer to disengage the control handle splines from the hub splinesRemove the hex head screw and the control handlef8l 4Remove three screws halves apart

Back to 1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual