1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual, Page 238Get this manual
RectifierRegulator Servicing Removal 1Remove the battery cables from the battery2Remove the rectifierregulator cover
rv 3Separate the engineyellow and yellowblue and gray leads' the stator lead connectorDisconnect wiring harness purple
bullet connectorsf21 4Remove the rectifierregulator red lead from the starter solenoidrJl 5Remove the four screws retaining the rectifierregulator to the cylinder blockRemove the rectifierregulator and sealIf undamaged, the seal can be reusedInstallation 1Apply light coating of OMC Triple-Guard grease to the rectifierregulator sealPlace the seal in its groove in the rectifierregulator1sl 2Position the rectifierregulator on the cylinder blockInstall the four rectifierregulator screws and tighten to 60-84 inIbs(7-9 Nm)'6l 3Connect the rectifierregulator red lead to the starter solenoidApply OMC Black Neoprene Dip to the connection