1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual, Page 230Get this manual

1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual, Page 230

Installation
1Apply OMC Loaquic Primer and OMC Nut Lockto the threads of the two top starter mounting screws
Position the starter and install the mounting screwsTorque to 14-16 ftIbs(19-22 Nm)
r:;;l r:;;l 3Attach ground wire and yellowred wire from neutral start switch to small posts on the bottom of the solenoidTighten nuts securely
12814Attach red rectifierregulator, engine cable, and power trim
cable wires to large solenoid postTighten nut securely
1291 5Attach power trim and

Back to 1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual