1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual, Page 211Get this manual

1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual, Page 211

it General Safety Warnings The timing wheel cover is machinery guardUse caution when conducting electrical tests on running enginesDo not wear jewelry or loose clothingBefore working on or removing any electrical parts, disconnect the battery cables at the battery to prevent electrical sparksBefore returning the motor to the owner, make sure: All electrical connections are tight, Insulator boots and sleeves are in place, and Electrical wires are routed and clamped in their original positionsDo not use jumper cables and booster battery to start the engineDo not charge battery in the boat with an external chargerFumes vented during either operation can lead to an explosionReplace any locking fastener (locknut or patch screw) if its locking feature becomes weakDefinite resistance to tightening must be felt when reusing locking fastenerIf replacement is indicated, use only authorized replacement or equivalent