1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual, Page 206Get this manual

1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual, Page 206

' and install it on the bearing housing Carefully apply OMC Gasket Sealing Compound to both housing flanges
33Lightly apply OMC Triple-Guard grease to new O-ring

1261 34Vertically align the propeller shaft housing screw holes

and position the anode downwardInsert the housing assembly until it seatsHold the driveshaft and rotate the propeller shaft to engage the internal splines of the two propeller shaftsPush the housing in by hand until the retaining tab slots are flush with those in the gearcase housing

Back to 1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual