1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual, Page 184Get this manual
Assembly Before beginning assembly procedures, all gearcase components must be thoroughly cleaned and in serviceable condition Refer to Cleaning and Inspection rv Remover andthe following components shownBearing 1Assemble of OMCPinion L.J Installer PIN 391257, as
114-20 12 in Hex Head Screw inD.DFlat Washer PIN 326584 Spacer PIN 3265741nstallerRemover PIN 326587 Washer (116 1314 inD.D PIN 391260 Plate and Bearing PIN 326582 Rod 114-20 1114 inHex Head Screw
2Apply OMC Needle Bearing Assembly Grease to the 18 needle bearings and insert them into the bearing case3Place the bearing on the installer tool with the lettered side of the bearing facing the top of the gearcaseUse OMC Needle Bearing Assembly Grease to hold the bearing on the toolIncorrect installation of the pinion bearing in the gearcase drastically reduces the life of the bearingThe bearing is tapered so that when installed correctly, its shape compensates for stresses in the gearcase and allows full bearing contactWhenever gearcase is disassembled, the pinion bearing should be checked to ensure that it has been installed with the lettering facing upDR34 17