1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual, Page 179Get this manual
r:;; 19Pull up on the detent arm until it snaps into NEUTRAL positionPush the pivot pin out of the housing, then reach inside and pull the shifter off the detent
i ball and spring can come out with great force while removing the detent
'" Wear safety glasses to prevent personal injuryThe detent
r:J9l 20Wrap the housing with shop clothRotate the detent lever 90 in either direction, then pull the detent out of the housing1201 21Remove the detent ball CD and spring Q) Remove the 25 forward gear needle bearings22The forward gear bearing and bearing housing are serviced as an assemblyIf either are worn or damaged, replace the entire assembly23Remove the pinion bearing only if it needs to be replacedBefore attempting removal, take out the bearing retaining screw on the side of the gearcase, or you'll damage the gearcaseReplace the screw's O-ring