1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual, Page 169Get this manual

1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual, Page 169

Propeller Installation r::=J These instructions apply when spacer is made of brassIf
spacer is made of nylon, replace with brass spacer,

PIN 320570
i pellers; twist and remove all spark plug leads2Place engine's shift lever in NEUTRAL
'" 1Avoid accidental starting of engine while changing pro-

rv 3Apply thrust bushing and the propeller shaftof large OMC Triple-Guard grease to inner taper propeller
4Install thrust bushing onto propeller shaft with shoulder of thrust bushing facing aft5Install propeller on propeller shaft by aligning splines and pushing until it seats on the thrust bushing
[!] 6Install the spacerengaging the propeller shaft splinesf21 7Wedge block of wood between propeller blade and the anti-ventilation plate

Back to 1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual