1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual, Page 164Get this manual
[";1 6If removal of the tilt limit cam and cam stop is required, pull the tilt tube halfway out of the swivel bracket with the slide hammerSeparate the spacer from the tilt tube, remove the cam and cam stop, and reconnect the spacer to the tilt tube t!J
7Pull the tilt tube from the stern bracket with the slide hammerWhen the tilt tube clears the port stern bracket, remove the tilt tube from the spacerInstallation 1Thread the starboard end of the tilt tube into the spacer2Thread the adapter onto the port end of the tilt tuber;l r:;] 3Using wood or leather mallet, tap the tilt tube into proper positionInstall the cam and cam stop, if removed