1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual, Page 163Get this manual

1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual, Page 163

Tilt Tube Servicing Removal
Support the motor with suitable hoist1Loosen the tilt limit cam and stop on the tilt tube2Remove the nut from the starboard side
OMC Steering Tube Service Kit, PIN 434523, includes the spacer and adapter required in the next steps
[!] 3Thread the spacer onto the starboard end of the tilt tube4Thread the adapter onto the port end of the tilt tube

Back to 1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual