1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual, Page 159Get this manual

1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual, Page 159

1 5Loosen both tilt limit cam retaining screws
06Remove the starboard tilt tube nut1sl 7Thread the adapter from OMC Steering Tube Service Kit PIN 434523 onto the port end of the tilt tubeThread OMC Slide Hammer PIN 432128 into the adapter until at least in(51 mm) of thread are engagedPull the tilt tube from the stern brackets
19l 8Remove the wiper from inside the steering tubeInspect the

Back to 1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual