1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual, Page 117Get this manual

1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual, Page 117

STEPCHARGE COIL TEST Ground Test 1Disconnect 6-pin Packard connector between stator and power pack2Attach 6-pin Packard test adapter from Ignition Test Kit, PIN 434017, to stator connector3Set peak-reading voltmeter to

f1l 4Alternately connect meter between brown, brownyellow stator leads, and clean engine groundCrank engine and observe meter at each connection: Any reading indicates charge coil is grounded Locate and repair ground, or replace stator assembly5Repeat Step using brownblack and brownwhite stator leads6If no reading is indicated in Steps or 5, go to Output TestOutput Test 1Set peak-reading voltmeter to

Back to 1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual