1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual, Page 77Get this manual

1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual, Page 77

26756 26755 28753

8Remove the idle and intermediate circuit air bleed orifices with OMC Driver PIN 317002
1201 9Rem?ve the float cover plug with large flat blade
screwdriver
10Remove the high speed fuel orifice with OMC Driver PIN 317002221 11To remove the fuel manifold from the throttle body,
remove the three screws and clampsInspection

1Inspect carburetor main body and float chamber Gasket surfaces must be smooth with no nicks or irregularities All nozzles and pick-up tubes must be securely in place All metal orifice inserts must be securely in place

Back to 1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual