1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual, Page 67Get this manual
Inspection
1sl 1To test the solenoid windings, calibrate an ohmmeter on low ohms scale and connect between the purplewhite and black leads
Meter should indicate 5.5 1.5 ohms
2To test solenoid valve and seat: Lightly pressurize inlet fitting with alcohol and syringe With lever in run position, no fluid should enter inlet fitting With lever in prime position, fluid should come out both outlet fittings
1al 3To inspect or replace internal components remove the four solenoid cover screws
19l 4When assembling solenoid, back up screws in their holes to